 |
MPC's electroplating process forms a strong mechanical bond between the plating layers and the plastic part. The plating actually increases the strength of the plastic part. |
|
|
Plastic Plating Substrates
- Platable ABS
- Platable ABS/PC Blends
Size limits: 48" X 120" X 12"
Plastic Plating Process
- Electroless Copper - applied autocatalytically to provide a conductive layer for subsequent electroplating processes
- Semi-bright Copper Strike - adds thickness, improves plating adhesion, protects against metal burn-off at the point of rack contact
- Bright Acid Copper - provides leveling and good thermal cycling
- Bright Nickel - strengthens the plastic, and provides a highly reflective finish
- Chromium - protects nickel layer against corrosion and provides a clean final finish
- Multiple de-ionized water rinses and hot air dryers - prevent water spotting
Important Notice: To help keep costs down
Molding parameters affect
plating performance. Consult MPC and your resin supplier
for proper melt temperatures, packing pressures, cycle times, drying parameters, and resin composition. |
 |
|
